SMKB-CUP-ECO Wind Speed Sensor
The wind speed sensor adopts the traditional three wind cup structure, the wind cup is made of carbon fiber material, and Has high strength and small starting wind speed. The cup body built-in signal processing unit can output the corresponding wind speed signal according to the user demand.
It has varietyof output method such as RS485/RS232, pulse, voltage and current, which can be widely used in advertising barrier , meteorology , ocean, environment, airports, ports, laboratories, industry and agriculture and transportation and other fields.
Technical Parameters
| Measurement range |
0~45 m/s ( Analog Output Type)0~70m/s (Digital Output Type) |
| Accuracy |
(0.3+0.03V)m/s (V: wind speed) |
| Resolution |
0.1m/s |
| Staring Wind Speed |
<0.5m/s |
| Power supply Mode |
DC 5V (Pulse Output Type) DC 12V to 24V (Analog & Digital Output Type ) |
| Output Options |
Any One specified while ordering
Current:4 to 20mA
Voltage: 0 to 5V
Digital: RS 232
Digital: RS 485 TTL
Level (Pulse output Type) |
| Standard Cable |
2 Meters |
| Operating Environment |
-40 to 60 Deg C, Humidity: 0 to 100% non-condensing |
| Protection Grade |
IP 64 |
| Sensor weight |
Around 130gms |
Wiring Method
There is -core aviation plug, whose output is at the base of the sensor. The definaition of each pin’s corresponding base pin
- If the sensor is equipped with our data logger , directly use the sensor cable to connect the sensor with the corresponding interface on the data logger
- If the sensor is purchased separately , the order of the wires as followed :
Signal Output
| Colour |
Analog Current / Voltage |
Digital |
| Red |
Power+ |
Power+ |
| Green/Black |
GND |
GND |
| Yellow |
Signal |
485 A+/TX |
| Blue |
|
485 B-RX |
Attention In Use
- Please check the packaging is intact, and check the product model is consistent with the selection.
- Do not live wiring, check the wiring is completed after the correct power.
- Sensor cable length will affect the product output signal, do not change the product when using, if there is a need to change, please contact with the manufacturer.
- Sensor is a precision device, the user when in use, please do not disassemble, with sharp objects or corrosive liquid contact with the sensor surface, so as not to damage the product
