Wind Direction Sensor
SMKBWD-V ANE-ECO is a sensitive wind direction sensor that gives a visual indication of wind direction. High precision magnetic hall effect sensitive chips are built in the housing shell.
The wind vane is constructed on low inertia light metal to show wind direction values. The product is wide range, good linearity, strong anti lightning capability , good performance. It has a variety of output options such as RS485/RS232/V oltage/Current 4 to 20mA, This sesnor can be widely used in advertising barrier , meteorology , ocean, environment, airports, ports, laboratories , industry , agriculture , transportation and other fields.
Signal Output
Colour |
Analog Current / Voltage |
Digital Rs 485 |
Red |
Power+ |
Power+ |
Green/Black |
GND |
GND |
Yellow |
Signal |
485 A+/TX |
Blue |
|
485 B-RX |
Technical Parameters
Measurement range |
0~359 Deg |
Accuracy |
+/-3 Deg |
Starting Wind Speed |
<0.5m/s |
Power supply Mode |
DC 12V to 24V(Analog & Digital Output Type) |
Output Options |
Any One specified while ordering Current:4 to 20mA Voltage: 0 to 5V Digital: RS 232 Digital: RS 485 |
Standard Cable |
2 Meters |
Operating Environment |
Temperature : -40 to 80 Deg C Humidity: 0 to 100% non-condensing |
Protection Grade |
IP 64 |
Sensor weight |
Around 210gms |
Wiring Method
There is -core aviation plug, whose output is at the base of the sensor. The definaition of each pin’s corresponding base pin
- If the sensor is equipped with our data logger , directly use the sensor cable to connect the sensor with the corresponding interface on the data logger.
- If the sensor is purchased separately , the order of the wires as followed :
Attention In Use
- Please check the packaging is intact, and check the product model is consistent with the selection.
- Do not live wiring, check the wiring is completed after the correct power.
- Sensor cable length will affect the product output signal, do not change the product when using, if there is a need to change, please contact with the manufacturer.
- Sensor is a precision device, the user when in use, please do not disassemble, with sharp objects or corrosive liquid contact with the sensor surface, so as not to damage the product.